Klicky PCB Mount - Ender 5 Plus Capybara Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear Klicky PCB mount for the Ender 5 Plus CoreXY Capybara Conversion.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the Capybara SB mount from the Creality Ender 5 Plus – CoreXY Capybara Conversion by Karol.
The modification allows a PCB Klicky probe to be mounted on the rear side of the toolhead using a standard Voron AB-style mount layout. This was made for a Capybara-converted Ender 5 Plus using a Stealthburner-style toolhead setup.
Important: The lower front mounting screws were also changed from M3 to M4 heat-set inserts.
PCB Klicky project:
https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky
Measured CAD position in my assembly for klipper setup:
Klicky PCB probe sits 6.42 mm below the nozzle
Nozzle center to Klicky PCB probe center distance: 54.87 mm
PCB Klicky is a PCB-based version of the Klicky probe concept. The original project uses a hybrid printed-part/PCB design where the printed part supports the PCB and the PCB helps align the magnets. The PCB Klicky repo also notes that wiring, magnet polarity, probe voltage/jumper setting, dock position, and Klipper macro values should be checked during setup.
Important setup notes:
Verify the probe offset on your own printer before use.
Check that the rear-mounted PCB does not interfere with the carriage, belts, dock, or toolhead wiring.
Confirm magnet polarity and docking alignment before running QGL, bed mesh, or auto-Z.
PCB Klicky may require dock position and Klipper macro adjustments.
This remix is intended specifically for the Ender 5 Plus CoreXY Capybara conversion and the mount geometry used in that conversion.