1 / 10
32mm U-Turn Hose Connector Steelpool _ Stahlpool 180 Grad Schlauchverbinder — image 1
1 / 10

32mm U-Turn Hose Connector Steelpool _ Stahlpool 180 Grad Schlauchverbinder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

180° U-turn hose connector for steel pools to connect filters and heaters

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
31
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Ich wollte die Stahlwand meines Pools nicht anbohren und es gibt kaum sinnvolle Möglichkeiten die Rohre zur Filteranlage sicher zu befestigen. Das Abdecken des Pools ist dann auch nur schwer möglich. Mit diesem 180° U-Turn Schlauchverbinder löste ich mehrere meiner Probleme:

  • Rohre werden am Handlauf der Poolkante fest gesichert

  • Rohre werden flach an der Innen- und Außenwand nach unten geführt, stehen nicht ab und nehmen so kaum Platz ein.

  • Kompakte und flache Bauweise. Pool kann nun problemfrei abgedeckt werden.

  • Durch die Übergang von ringförmig auf elliptisch und wieder zurück wird der Volumenstrom trotz flacher Bauweise nicht eingeschränkt und es entsteht kein Engpass.


I didn’t want to drill into the steel wall of my pool, and there are hardly any practical ways to securely attach the pipes to the filter system. Covering the pool would also be difficult. With this 180° U-Turn hose connector, I solved several of my problems:

  • Pipes are securely fastened to the handrail along the pool edge

  • Pipes are routed downward along the inner and outer walls, lying flat against them; they don’t protrude and thus take up hardly any space.

  • Compact and flat design. The pool can now be covered without any issues.

  • Thanks to the transition from a circular to an elliptical shape and back again, the flow rate isn’t restricted despite the flat design, and no bottlenecks occur.

Print Settings

Printer Brand:

Anycubic

Printer:

i3 Mega S/Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

50%, concentric / 100% if you want to walk that extra mile

Filament: Sunlu PETG gray

Notes:

Anything sturdier than PLA shoud do the job. Mine in PETG works for over a year now.
For extra stability you can also ramp the wall count up to 6.
Not necessary but a quality of life feature, if possible: Print supports in PLA (Other material) to get better finish and easier support removal.

!!!IMPORTANT!!!
Check in your slicer for strange solid layers in the model. Cura for Anycubic Mega S did just fine with the STL. Orca (SnOrca) just created some odd solid layers in the cavity, when slicing from STL or 3MF. Slicing from STEP file did just fine. Strange thing, because in Freecad everything is fine.
So keep in that in mind and use the STEP file for slicing in Orca.

Category: Outdoor & Garden

Tags