Parametric Enclosure Generator COMMUNITY — Free OpenSCAD PCB Box Generator

A free parametric enclosure generator for electronics projects

built on OpenSCAD + BOSL2. One file — any enclosure you need.

Set your dimensions, pick connector types, choose a lid fastening —

hit F6. No manual CAD work required.

---

⏱ How fast is it?

| Task | Manual CAD | This Generator |

|------|-----------|----------------|

| Basic box with one connector | 2–4 hours | 3 minutes |

| Box with PCB standoffs + 3 connectors + fan | 6–10 hours | 8 minutes |

| Iterate on lid joint clearance | 30 min/iteration | 10 sec/iteration |

| Generate BOM for ordering | Manual counting | Automatic |

---

## ✅ What's included in the COMMUNITY version

Dimensions & Shape:

- Any size from 20×20×10 mm to 400×400×300 mm

- Adjustable wall thickness, floor/ceiling thickness, corner rounding, chamfer

Lid Fastening (5 types):

- Self-tapping screws · Snap-fits · Magnets · Heat-set inserts · Hex nuts

Joint Profiles (3 types):

- Flat · Lip · Ledge

Connectors (6 types):

- USB-C · USB-A · DC Jack M8 · Jack 3.5 mm · RJ45 · HDMI

- Up to 8 connectors on any face

Ventilation:

- Slots / holes / honeycomb on top and side walls

- Fan mount: 30 / 40 / 60 / 80 / 120 mm

PCB Standoffs:

- M2 / M2.5 / M3, height 2–60 mm

- 2, 4 or 6 standoffs — corner or grid layout

Mounting:

- Mounting ears · Keyhole wall slots · Rubber feet recesses/pads

Text & Labeling:

- 2 fields, 3 fonts, any face, emboss or deboss

Materials:

- PLA / PETG / ABS / ASA — automatic XY shrinkage compensation

OpenSCAD console outputs on every render:

- Recommended screw length for current configuration

- Bill of materials (fasteners, inserts, quantities)

- Bambu Studio print settings as JSON

---

## 🔒 PRO version unlocks

- 26 connectors instead of 6: XT30, XT60, IEC C14, IEC C8, GX16, GX20,

XLR 3/5-pin, DB9/15/25, USB-B, Micro/Mini-USB, Jack 6.35, MIDI and more

- DIN rail TS-35 clip (EN 60715)

- VESA 75×75 / 100×100 (MIS-D standard)

- IP54 gasket groove (O-ring channel on any joint profile)

- Cable glands M12 / M16 / M20 (threaded, IP54–IP68)

- Removable side panels (tongue-and-groove, trapezoidal profile)

- Internal dividers X/Y axis with wire routing hole

- 4 text fields, 12 fonts instead of 2/3

- 15 one-click presets (Micro-Dongle to Maxi)

- 108 automated geometry tests

---

## 💾 Get PRO version

👉 Ko-fi: https://ko-fi.com/s/d83d51aacf

👉 Gumroad: https://belik.gumroad.com/l/idxwoz

---

Zero supports required — all geometry is self-supporting.

Tested on Bambu Lab P1S, P2S, X1C, A1, A1 mini. Works with any FDM printer.

Requires OpenSCAD dev build (2025+) with BOSL2.

OpenSCAD + BOSL2 · CC BY-NC-ND 4.0

⚠ *This project was created with AI assistance (OpenSCAD + BOSL2).

Preview images are 3D renders, not photographs of printed parts.*