1 / 14
Q1 Pro Remix + EBB36 GEN2 + A1/H2D Hotend + MMU HUB + Post-Extruder Cutter — image 1
1 / 14

Q1 Pro Remix + EBB36 GEN2 + A1/H2D Hotend + MMU HUB + Post-Extruder Cutter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Q1 Pro mix of remixed design's to fit my needs and try new things.

Rating
0 / 5
Likes
7
Downloads
21
Makes
0
Views
251
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

My Q1P pro toolhead board was becoming finnicky. Instead of replacing, decided to use some EBB GEN2's I had laying around.

Thank you to the original model designers.

I will try to update this with screws/inserts needed. For most parts, I reused screws from the originals.

Update 10/4: Added multicolor print

Update 9/17: Transitioned to a new fan duct. no longer using a cover as i adapted a new fan duct to my Q1P. 

Fused this model with my extruder/heatsink fan holder to improve overall rigidity on my Q1P


Additionally, assembled my cutter:

this uses a trimmed Bambu Filament Cutter Replacement Blade (can be found on Ali,Amazon). secured with a m2 screw and m2 heat insert. to be tested soon.

Update 6/19: Fixed collision of Cutter and Front Cover. Models adjusted to work together.

To Print the Toolhead Base:

the top edge is chamfered to provide a face to place on build plate. depending on your layer adhesion and bridging/overhang printing, you could print with out supports. minimal are required.