Wall-Mount for tool holder of Rowenta X-Force Vacuum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount with same profile as charging station, so you can mount the original tool holder separately
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Don't want your accessories right below the charging station? Want to mount them somewhere else?
But the (very good) original tool holder clips into the charging dock and can't be mounted to the wall by itself?
No problem, clip the tool holder into this custom wall mount.
Features
30mm distance from wall
enough space to hang a Aqua Head or other accessory head.
3 screw holes for up to M6 screws for strong hold (you don't need to use them all)
tested with Rowenta X-Force Flex 14.80 Vacuum
Printing
Material: PETG or PCTG or PC or GreenTecPro
part orientation: auto (imagined screws in holes would point down)
Support: none needed
Brim: no
Nozzle size: larger ist better
Layer Height: Standard for your nozzle size. e.g. 0.40mm with 0.8mm nozzle
Infill: 13% Honeycomb
Wall-Strength: 3 on 0.8mm. 4 on 0.6mm nozzle. 5 on 0.4mm nozzle.
Warning & Feedback appreciated
Tested with Rowenta X-Force Flex 14.80 Vacuum. Other models may vary (but probably don't)
Uploaded part is slightly refined version of tested part, but has itself not been tested.
Differences:
Hole to access and release latch, so holder can be removed from wall
Width of rails has been increases for easier fit.
License
Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0
Share with others
Don't keep your modifications to yourself
Always attribute the source!