ZSA Voyager Navigator Bridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you would like to keep the halves together here is the solution, slight angle and tent.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Bridge for the ZSA Voyager keyboard with Navigator trackball or trackpad.
Keep the halves together with some angle and tent (25 degree angle and 7 degree tent).
Use preferably with two short TRRS cables, either straight or angled. Length something like original short cable or slightly shorter.
Note! There are two covers, one for trackball (on photo) and trackpad (see CAD), have not tried trackpad version but it should be ok.
There is a model with slightly less angle/tent also (15/6 degree):
If you like my work, consider buying me a coffee:
https://ko-fi.com/maildannesholkse