1 / 4
58mm Filter Adaptor for GoPro Mission 1 (with Threads!) — image 1
1 / 4

58mm Filter Adaptor for GoPro Mission 1 (with Threads!)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple filter adaptors for GoPro Mission 1

Rating
0 / 5
Likes
8
Downloads
238
Makes
0
Views
623
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

There are two versions, with and without threads. I recommend printing with a .12mm layer height, this should allow the threads to print without a problem. 

If you have issues with the threads printing, use the other model without threads. The filter's threads just snap into it with an interference fit, don't try to thread the filter on.

The assembly then slides onto the GoPro Lens with a friction fit. Works with GoPro's NDs also!

Print Recomendation:

  • Low-shrinkage plastics, like PLA or PETG

  • 0.12mm Layer Height

  • 50% Infill 

  • Slow your wall speed to below 100mm/s

Tags