Unmounted Turntable Cartridge Storage Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have a need to store unmounted turntable (record player) cartridges, this is for you.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
What
This is storage case for unmounted turntable (record player) cartridges with standard 1/2 inch mounting holes.
The case has two raise protrusions for the cartridge mounting holes. A pair of screw driven clamps to hold it in place. A snapp-on lid to keep dusts out and the cartridge safe.
Printing
Print all 9 items in the provide orientation (PETG strongly recommended).
0.2mm layer height, 2x walls, 10% infill, no support. Use brim if your printer has adhesion issue (recommend fixing the z-offset instead).
The tolerances are mostly loose. Turn on elephant's foot compensation is recommended.
Assembly
Screw the screw and the corresponding nut together so the nut is all the way to the bottom of the screw. Please note one pair has left-hand thread, so you need to turn counter-clock wise to screw them together.
Put the coupler inside the center block hole, align the two screws' ends and connect them together.
Slide the assembly above through the side of the base piece and center it. Make sure the center block is at the center of the base.
Align and push the platform piece down and snap it to the base.
See attached images for reference.
Issues?
Please let me know if you run into issues.