Clipsal & HPM Switch mech for pushbutton conversion TUYA SHELLY
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows cheap 12mm momentary switches to replace latching switches on HPM or CLIPSAL switch mechs.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Fits standard 12mm momentary switches easily available from Aliexpress. I used these here, in 12mm, Momentary, Red, 110-220V. They are very low current and you can either wire across the relay terminals if you want the light to be OFF when the switch is on, and ON when the switch is off, or wire it across the mains supply if you want it on all the time.
I got mine from this seller - very good quality, $2 each! https://www.aliexpress.com/item/1005006953954542.html
These will work with cheap TUYA or SHELLY modules that support momentary switching.
Print top switch-face down so you get a nice textured layer, or use ironing.
I printed at 15% infill, they take around 12 minutes each to print, in white PLA.