1 / 7
Photo Box with Sliding Lid - 10x15 cm / 4x6 inch — image 1
1 / 7

Photo Box with Sliding Lid - 10x15 cm / 4x6 inch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple stackable box to keep your 10x15 cm (4x6") photo prints tidy.

Rating
0 / 5
Likes
4
Downloads
17
Makes
0
Views
75
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution

A simple stackable box to keep your 10x15 cm (4x6 inch) photo prints tidy. The lid slides over the base like a shoebox and holds by friction - no clips, no hinges, nothing to break. Two finger cut-outs on the short sides let you lift the pictures out easily.

It comes in three weights, so you can trade material against looks and sturdiness:

  • Solid (fotobox_bottom / fotobox_top) - closed walls, ~68 cm³ per part. Strongest, cleanest look.

  • Light (fotobox_hex_*) - honeycomb floor and walls, solid lid skirt. ~43 / 49 cm³.

  • Ultra-light (fotobox_more_hex_*) - honeycomb everywhere, including the lid skirt. ~37 cm³ per part, roughly 45 % less material than the solid version.

Dimensions

  • Inside usable space: 110 × 160 × 28 mm

  • Outside (closed): 118.8 × 168.8 × 32 mm

  • Wall / floor thickness: 2 mm

Printing

  • No supports needed on any version.

  • Base prints bottom-down; lid prints upside-down (open side up, roof on the plate).

  • PLA or PETG both work. Suggested: 0.2–0.3 mm layers, 2–3 perimeters; on the solid version 10–15 % infill on the floor is plenty.

  • Needs ~170 mm on one axis - fits most printers. Designed and printed on an Anycubic Predator (delta).

Lid fit
Designed with 0.4 mm clearance per side for a smooth friction fit. If it's too tight, scale the lid up ~0.3 %; if too loose (more likely on the ultra-light lid, since the perforated skirt grips less), use the solid or light lid instead - they hold better.

Tags