SNZB-02P wall mount (multiple versions)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This are multiple versions of a wall-mount for the SNZB-02P.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount for the Sonoff SNZB-02P. It comes in different versions:
SNZB02P mount simple: has a thin backside and can be glued to a surface, e.g. a wall
SNZB02P mount thick_backside: The backside is 5mm thicker - this should give a bit of thermal insulation. The mount can be glued to a surface.
SNZB02P mount thick_backside w_hole: This mount also has a thicker backside version. It additionally has a hole, so it can be glued or screwed to a surface.
All versions have a hole in the bottom, so you could use them with the sensor upside-down (to avoid dust getting in trough the sensor holes on the top).
SNZB-02P: https://sonoff.tech/en-de/products/sonoff-zigbee-temperature-and-humidity-sensor-snzb-02p