1 / 1
Apprentice Cowl S 2 Mini 1.2M
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found one at Thingiverse but the dimensions seemed to be a bit off so I reworked it.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 89
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reworked one I found elsewhere because the measurements were not to my liking.
I didn't compensate for the down thrust on the motor but other than that it fits like a glove while still using the spinner. The original didn't either. ( did this for a buddy in need of the cowl )
Printed nose up with generic PLA.
0% infill
Top Layers = 4 ( you could probably get away with 2 or 3 )
I actually stopped the print when it got to the shaft cut out area.
Bottom Layers =0
I used a brim to ensure it sticks to the bed.