Gridfinity 1×1 Bin — Magnet Holes + Finger Scoop | Small Parts Organizer, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The little workhorse of the grid: a 1×1 Gridfinity bin with a finger scoop and 4 magnet holes. Perfect for screws, SDs..
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
A dedicated home for all the tiny things.
This single-cell 1×1 bin is the most-used size in any Gridfinity collection. The built-in scoop lets you sweep small parts out with a fingertip, and the four magnet holes keep it locked to a magnetic baseplate when you yank a drawer open.
Mix a handful of these with larger bins on a baseplate to build exactly the organizer your drawer needs.
### Features
- 📐 True 42 mm Gridfinity — drops into any standard baseplate
- 👍 Finger scoop — easy one-finger access to small parts
- 🧲 4 magnet holes (Ø6.5 × 2.4 mm) for Ø6 × 2 mm magnets
- 🪣 35 mm tall — handy depth without wasting filament
- 🖨 Prints flat & support-free
### Perfect for
Screws & nuts · SD/microSD cards · resistors & SMD parts · beads & findings · pills/vitamins · earbuds · erasers, clips, dice
---
## PRINT SETTINGS
- Material: PLA or PETG
- Layer height: 0.20 mm
- Walls / perimeters: 3
- Infill: 10–15 %
- **Supports:** None
- Orientation: As exported — open top up, feet down
- Print time: ~35–50 min · ~12 g
Tip: Print a whole batch — you'll always want more 1×1s. Pair with the Gridfinity Baseplate 2×2 in this pack.
