Gridfinity 1×1 Bin — Magnet Holes + Finger Scoop | Small Parts Organizer, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The little workhorse of the grid: a 1×1 Gridfinity bin with a finger scoop and 4 magnet holes. Perfect for screws, SDs..
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
A dedicated home for all the tiny things.
This single-cell 1×1 bin is the most-used size in any Gridfinity collection. The built-in scoop lets you sweep small parts out with a fingertip, and the four magnet holes keep it locked to a magnetic baseplate when you yank a drawer open.
Mix a handful of these with larger bins on a baseplate to build exactly the organizer your drawer needs.
### Features
- 📐 True 42 mm Gridfinity — drops into any standard baseplate
- 👍 Finger scoop — easy one-finger access to small parts
- 🧲 4 magnet holes (Ø6.5 × 2.4 mm) for Ø6 × 2 mm magnets
- 🪣 35 mm tall — handy depth without wasting filament
- 🖨 Prints flat & support-free
### Perfect for
Screws & nuts · SD/microSD cards · resistors & SMD parts · beads & findings · pills/vitamins · earbuds · erasers, clips, dice
---
## PRINT SETTINGS
- Material: PLA or PETG
- Layer height: 0.20 mm
- Walls / perimeters: 3
- Infill: 10–15 %
- **Supports:** None
- Orientation: As exported — open top up, feet down
- Print time: ~35–50 min · ~12 g
Tip: Print a whole batch — you'll always want more 1×1s. Pair with the Gridfinity Baseplate 2×2 in this pack.