Additional track armour for the Stug 3 1:35 model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional track armour and the connected Schneeketten for the Stug 3 1:35 model
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
The mod is made for the Stug 3 model uploaded by mikolaj.mazik
The Schneeketten were made by napobona.z
Big thanks to the original creators!
I have changed the tracks a bit, such that they firmly connect to each other, and put them together, to be printed in 3 stripes. They still rotate, its just easier to put them on the model this way.
The frontal add-on track armour model was modeled from a well-known tank game, I have tweaked the tracks a bit to be more 3d-printer friendly.
All of these were printed with 0.4 nozzle and 0.12mm resolution in PETG. Some print settings need to be adjusted. Take a look at the last photo.
Ideally it should be printed with 0.2 nozzle. I sadly dont have one, so went with what I have. The issues of 0.4 nozzle can be easily seen on the add-on armour tracks.
DO NOT USE SUPPORTS! (those will be impossible to take off without breaking the part)