Additional track armour for the Stug 3 1:35 model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional track armour and the connected Schneeketten for the Stug 3 1:35 model
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
The mod is made for the Stug 3 model uploaded by mikolaj.mazik
The Schneeketten were made by napobona.z
Big thanks to the original creators!
I have changed the tracks a bit, such that they firmly connect to each other, and put them together, to be printed in 3 stripes. They still rotate, its just easier to put them on the model this way.
The frontal add-on track armour model was modeled from a well-known tank game, I have tweaked the tracks a bit to be more 3d-printer friendly.
All of these were printed with 0.4 nozzle and 0.12mm resolution in PETG. Some print settings need to be adjusted. Take a look at the last photo.
Ideally it should be printed with 0.2 nozzle. I sadly dont have one, so went with what I have. The issues of 0.4 nozzle can be easily seen on the add-on armour tracks.
DO NOT USE SUPPORTS! (those will be impossible to take off without breaking the part)