Hot Wheels and Other Collectibles Display Case (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flexible display case designed for Hot Wheels but applicable to other collectibles as well.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This model was made to display numerous Hot Wheels in individual boxes which can be attached to one another in multiple rectangular configurations. The collections can be hung on the wall or set on a desk/countertop. The design is parametric so that the display boxes can be resized to accommodate other collectibles such as game miniatures, shot glasses, beer glasses, 3d prints, art, figurines, etc. Individual boxes are printed and attached to one another with dovetails. A basic configuration contains 4 boxes in a rectangular 2x2 format. Additional boxes can be added to make any (2+a) x (2+b) rectangular matrix of boxes where a and b are any whole number. See examples of 2x2, 3x2, 3x3, and 4x4 configurations.
Boxes can also be laid on their back to make convenient carrying cases.
Boxes are attached to each other with dovetails which are part of the printed boxes which I found to be sturdier than separately printed dovetails. There are 9 separate box designs including top left, top middle, top right, middle left, middle middle, middle right, bottom left, bottom middle, and bottom right. The 4 corner boxes (top left, top right, bottom left, bottom right) can be used to make a simple 2x2 matrix of boxes. Middle edge boxes (top middle, left middle, right middle, bottom middle) can be added to increase the number of rows and columns of the matrix. The center box (middle middle) is used to fill in all the interior box spaces.
Maybe unique to my printers, but I had issues with warping of the box backs when printing. To minimize warping, there are elements added to the design such as the open back, coves, and chamfers. Boxes are printed back down with support material in the open space at the back of the box. No support is used for the dovetail sockets as this made for a tight fitting dovetail joint. No brim is used as this was difficult to remove and maintain tight fitting dovetails and it didn't significantly reduce warping.
The support material can be removed or left in the backs. If hanging on the wall, some support material will need to be removed for the French cleat hangers. One part of the French cleat is super glued or "glooped" to the back of appropriate boxes and the other part is screwed to the wall into studs, drywall anchors, or some other appropriate system (e.g. decorative board attached between studs).
There is a small "speed bump" at the front bottom of each box to help keep cars from vibrating out of the boxes.
Aside from organic print supports for the open back, printing is pretty straightforward: no brim, 15% infill, 0.4 nozzle, 0.2 first layer height, 0.2 layer height.
A Fusion file is included for changing box dimensions which can be executed by using "Modify" and "Change Parameters". Different box dimensions can be used together in a box matrix as long as box depths are the same (see 3x2 image for example). 3MF and gcode files are included for each of the 9 box designs as well as the French cleat.