Dell OptiPlex 390 3010 SFF Front IO to 5.25" Front Panel Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to install the front IO assembly from an OptiPlex 390 / 3010 SFF computer and put it in a standard computer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was tasked with scrapping 2 old Dell OptiPlexes. Instead of binning all the parts, I set about reusing as many of them as possible. This model allows you to re-use the front IO in a standard 5.25" front panel.
You may need an HD audio extension and / or a USB header extension.
This model will work with the assembly from 7010 and 9010 models though 2 USB ports will be hidden. I have added the .f3d file if you want to measure your IO and add the cutouts for the extra 2 USB ports. If you do, please upload a remix and a make so others can benefit.
- PLA, PETG or ABS
- 0.2mm layer height
- 20% infill
- 6x #6-32 UNC screws - 2 to mount the bracket, 4 to mount the struts inside the bracket
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.