Dell OptiPlex 390 3010 SFF Front IO to 5.25" Front Panel Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to install the front IO assembly from an OptiPlex 390 / 3010 SFF computer and put it in a standard computer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was tasked with scrapping 2 old Dell OptiPlexes. Instead of binning all the parts, I set about reusing as many of them as possible. This model allows you to re-use the front IO in a standard 5.25" front panel.
You may need an HD audio extension and / or a USB header extension.
This model will work with the assembly from 7010 and 9010 models though 2 USB ports will be hidden. I have added the .f3d file if you want to measure your IO and add the cutouts for the extra 2 USB ports. If you do, please upload a remix and a make so others can benefit.
- PLA, PETG or ABS
- 0.2mm layer height
- 20% infill
- 6x #6-32 UNC screws - 2 to mount the bracket, 4 to mount the struts inside the bracket
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.