Packmini Omni-X Case Insert for Steam Controller
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.91 – €9.66 net (excluding VAT)
For file: EN4MAX_Omni-X Steam Controller Insert Angled.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.79 excluding VAT (range midpoint).
- Weight reported by the author
- 113 g
- Print time reported by the author
- 9 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A printable Steam Controller (2026) case insert for the Packmini Omni-X Universal Controller Carrying Case.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Standard Digital File License
A printable case insert for the Packmini Omni-X Universal Controller Carrying Case designed to fit the new Steam controller (2026).
This is my first 3D model, and I'm very new to 3D printing in general, but this turned out really well and securely holds the controller and puck completely upside down (test carefully!) with no scratching or release ribbon.
The design was motivated by my desire to have a case similar to the DualSense Edge, so I have spare thumb caps tucked under the insert (though the cable could go there too).
Printing Instructions
Tree supports; print with flat face up
Ironing on top layer; you might be able to get the insert smoother using adaptive layer height also
PETG recommended for heat resistance
I did 15% infill originally, but it's fine with 10% (or less, probably)