1 / 7
Singer Futura Series Needle Swing Zigzag Servo Linkage Bight Actuator Arm — image 1
1 / 7

Singer Futura Series Needle Swing Zigzag Servo Linkage Bight Actuator Arm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement arm for Singer Futura sewing machines

Rating
0 / 5
Likes
2
Downloads
2
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print with a 0.2mm nozzle for best results!

Tested to fit on my Singer Futura 1050, but should fit for other models as well. Printed in PETG-HF with a Bambu P1S, fit perfectly. You need to glue the top cover on and reuse the internal metal parts from the original part. The ball joint and bushing is press fit in place with a vice. I used some grease inside as well.

I think these parts will fit on the following models (testfit and let me know if you try them out please!): 

  • Singer Futura 1050

  • Singer Futura 1100

  • Singer Futura 1110

  • Singer 6785

  • Singer 6790

I have some experience adjusting the Futura 1050 now, and there's not too much information on these machines. If you need help, ask in the comments and I'll try to help.

On my machine, I:

  • replaced the motor bushings (link here)

  • glued the top cover

  • replaced the plastic zigzag arm/bushing

  • replaced the Rifa caps

  • replaced the bobbin/hook gear

  • adjusted the timing

  • adjusted the zigzag range of motion and resting position

Tags