Large laptop stand, for 17-inch models
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom-designed for an ASUS ROG 17-inch gaming laptop. Prints in pieces, with no glue or hardware required.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find any suitable stands for this giant laptop, so I created my own. No AI used whatsoever.
This laptop is approximately 40x28 cm and quite heavy.
It's an easy print, but the tolerances are tight. If your printer is not perfectly calibrated, you might want to tinker with X-Y contour compensation.
Make sure you have a shell of at least 1.5 mm for sturdiness. Suggested parameters: 0.28 mm layer height, 4 walls, 6 top layers, 6 bottom layers. Infill is not as important; I used 9 % concentric infill.
Printed on Snapmaker U1 using generic black PLA.
If you print this, please share your makes and comments.
Cheers!
Brujo3d.