1 / 6
Various Spacers - for a FAS Pack (TheBoardGarage) inside of a Fungineers Black Box — image 1
1 / 6

Various Spacers - for a FAS Pack (TheBoardGarage) inside of a Fungineers Black Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made these various parts for my FAS pack build inside of the Fungi Black Box. All were printed in 72D TPU.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
40
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

LED spacer - holds down the LED inside of the black box, and also prevents misc. cables from being able to move around.

Fuse cover - Designed for TheBoardGarage's fuse block. It isolates the fuse from contacting anything else, locks both XT60s in place, and acts as a spacer for the pack when combined with the FAS spacer.

FAS spacer - goes in the corner next to the BMS mounted to the FAS pack. Prevents the pack from moving around when combined with the fuse cover. Also prevents the pack from being able to slide far enough that the BMS can contact the wall.

All pieces were printed in 72D TPU on my CC. They may be weak if printed in a brittle material.

All pieces have been tested in extreme trail scenarios on some of the gnarliest trails in PA.

Tags