Brutalist Alphastrike Building(s) - Small
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intended as a 3D printed alternative to the Battletech Alphastrike buildings, in a Brutalist style. Prints supportless.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 116
- Makes
- 0
- Views
- 486
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Overall dimensions are 1.5" x 1.5" x 3" for the original version, to match the taller, small buildings in the Alphastrike starter set. 6mm or about 1:300 scale
Edit: Added midsection pieces for a 2" tall building.
Designed and oriented to print without supports with PLA.
Need 1 base, 1 midsection, 1 top, and a locator pin for connecting the top and midsection. All are intended to be joined with plastic cement or glue.
Midsection is pre-oriented upside down for easier printing. Locator pin is slightly smaller than alignment holes for easier fit, but can be re-scaled as desired.
Model in photos is a first prototype without a separate roof section. Revised version also has larger steps on base for better definition, vent vanes in various amounts
Top 2 has an inset area intended to be painted blue for a pool, or filled with turf for a rooftop garden, like the example model.
Inspired by Quake Brutalist Jam III.
Mech and infantry models not included.