1 / 2
Toniebox Ladestation / Toniebox charging station — image 1
1 / 2

Toniebox Ladestation / Toniebox charging station

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

vollständiger Ersatz / 100% replacement

Rating
0 / 5
Likes
2
Downloads
4
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Der Stecker der originalen Ladestation ist kaputt gegangen. Das passende Netzteil mit Stecker hatte ich noch in meiner Kabelkiste. Passend dafür die simpel gehaltene Station. In das innere des Oberteils habe ich Metallgewichte mit Heißkleber geklebt, damit die Basis nicht abhebt, wenn die Toniebox hochgehoben wird. Das Unterteil habe ich auch mit Heißkleber fixiert.

https://www.tinkercad.com/things/kySw5vrqvXx-toniebox-ladestation-toniebox-charging-station?sharecode=mt4ohQnVfEsPmtbVIz2UOltiVRTVsEeLWc3etcVoU3g

PETG, 0.8mm Nozzel, 0,4mm Layer, Supports, sollte aber in einer großen Zahl von Konfigurationen gut druckbar sein.

The original charging station's plug broke. I still had the right power adapter with a plug in my cable box. The simply designed station was a perfect match. I used hot glue gun to attach metal weights inside the top part so the base wouldn't lift up when the Toniebox is picked. I also secured the bottom part with hot glue.

https://www.tinkercad.com/things/kySw5vrqvXx-toniebox-ladestation-toniebox-charging-station?sharecode=mt4ohQnVfEsPmtbVIz2UOltiVRTVsEeLWc3etcVoU3g

PETG, 0.8mm Nozzel, 0,4mm Layer, supports, should be printable in a wide variety of configurations, however.

Tags