Never Lose The End Of Your Tape Again! - Tape End Finder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model solves the age-old problem: finding that freaking edge of a roll of tape! Print in place, no support.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
We all know that feeling: you're working on a project, and the edge of the tape sticks to the roll and disappears. You waste time picking, scratching, and trying to get it started again.
-This model solves the problem once and for all!
-Print in place, in under 20 minutes, no support needed.
How to use:
1. Hold the tool in your hand with your thumb on the grip.
2. Slide it along the outer edge of the tape roll.
3. When the tip catches or feels a slight “bump,” pause and gently dig under the tape.
4. Once the edge lifts, pull and start taping again.
-If you don’t find it on the first pass, simply try the other direction around the roll.
-If used correctly, you should be happily taping again in under 15 seconds!
Print Settings:
Layer Height: 0.12mm.
Nozzle: 0.4mm.
Infill: 10%.
Perimeters: 3 Walls.
Material: PLA.
Support: No.
Bed adhesion: No.