1 / 8
Never Lose The End Of Your Tape Again! - Tape End Finder — zdjęcie 1
1 / 8

Never Lose The End Of Your Tape Again! - Tape End Finder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model solves the age-old problem: finding that freaking edge of a roll of tape! Print in place, no support.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

We all know that feeling: you're working on a project, and the edge of the tape sticks to the roll and disappears. You waste time picking, scratching, and trying to get it started again.

    -This model solves the problem once and for all!

    -Print in place, in under 20 minutes, no support needed.

How to use: 

    1. Hold the tool in your hand with your thumb on the grip.

    2. Slide it along the outer edge of the tape roll.

    3. When the tip catches or feels a slight “bump,” pause and gently dig under the tape.

    4. Once the edge lifts, pull and start taping again.

-If you don’t find it on the first pass, simply try the other direction around the roll.

-If used correctly, you should be happily taping again in under 15 seconds!

Print Settings: 

Layer Height: 0.12mm.

Nozzle: 0.4mm.

Infill: 10%.

Perimeters: 3 Walls.

Material: PLA.

Support: No.

Bed adhesion: No.

Tagi