No-Moving-Parts Garden Sprinkler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully 3D-printable garden sprinkler with no moving parts. Uses a standard G 3/4" threaded fitting, delivers up to ~3 m.
- Rating
- 4.5 / 5
- Likes
- 9
- Downloads
- 57
- Makes
- 2
- Views
- 405
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Garden Sprinkler
A simple, fully 3D-printable garden sprinkler with no moving parts. Just connect it to a standard garden hose and turn on the water. The design ensures a smooth and even spray pattern while remaining reliable even at lower water pressure.
What you need
Printed sprinkler body
1× G 3/4" quick-connect fitting (female thread)
Printing
Recommended material is Prusament PETG, which offers good durability and weather resistance for outdoor use.
Material: PETG
Layer height: 0.20 mm
Supports: build plate only
Infill: as desired (recommended at least 3–4 perimeters for strength)
Assembly
The sprinkler body features an external G 3/4" thread. Simply screw on a standard hose quick-connect fitting with an internal G 3/4" thread. No sealing tape or additional hardware is required.

Usage
Connect the sprinkler to your garden hose and turn on the water. The spray radius can be easily controlled using the water tap, ranging from gentle watering near the sprinkler up to approximately 3 meters radius.
The sprinkler produces a consistent circular spray pattern, contains no moving parts, and works reliably even at lower water pressure.