Grommet for mobile air conditioner hose 150mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grommet for mobile air conditioner hose 150mm
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Grommet for mobile air conditioner hose 150mm
A simple grommet that I created to get hot air from the air conditioner through a polystyrene board in the window.
It is a simple and easily printable model. It consists of two parts, the main one with the grommet and the counterpart on the outside. In the corners there are holes for 6mm screws, which connect the two parts and create a fairly solid and durable grommet. But it can only be used with a chimney
I print from PETG
layer 0.28
3 perimeters
10% infill is enough
Supports Yes
Variants with a chimney 32, 42 and 52mm for passage through boards of different thicknesses.
Wedge to block the second half of the window so it doesn't open
Spacer, if the piece on the opposite side needs to be supported