1 / 4
Metallica Name Logo (With Magnetic Mounting Options) — image 1
1 / 4

Metallica Name Logo (With Magnetic Mounting Options)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Multi-part Metallica name logo

Rating
0 / 5
Likes
7
Downloads
22
Makes
0
Views
78
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a multi-part 3D printable Metallica name logo designed for clean printing and versatile mounting.

The iconic end letters “M” and “A” are printed as individual pieces and work universally with all versions. The middle “ETALLIC” section comes in two distinct stylistic variations based on the geometry of the middle letter "A":

  • Symmetrical "A" Version: A standard, balanced letter geometry.

  • Vertical "A" Version: The right side of the "A" is perfectly vertical.

 

MAGNETIC MOUNTING VARIATIONS

Both stylistic versions of the “ETALLIC” print include a secondary file variant featuring a pocket on the back designed to press-fit a 0.425” x 0.068” magnet. Because of the different letter shapes, the magnet placement varies:

  • On the Vertical "A" version, the magnet pocket is perfectly centered.

  • On the Symmetrical "A" version, the pocket is offset and tucked into the bottom section of the "L".

  

DIMENSIONS

  • Total Height: 6.65 inches

  • Full Width: Almost 16 inches

  • Thickness (Depth of letters): 0.5 inches

  • Total Depth (Proximity profile): Approximately 2.187 inches

  • Middle Section: 1.5 inches high / 6.75” long

  • End "M" and "A": Angle back at 20 degrees

 

PRINT SETTINGS

  • Orientation: Print with the face profile side flat on the print bed for the smoothest, cleanest face surface finish.

  • Material: PLA

  • Layer Height: 0.20mm

  • Infill: 10% - 20%

  • Supports: None required if printed flat.

 

TWO-TONE FILAMENT COLOR CHANGE TIP

To get a striking two-tone look with a different face color (like the classic silver-on-black or similar styles seen in the images:

  1. Slice the model flat on its face.

  2. Program a filament change or pause in your slicer after the first few layers.

  3. The first layers will form the crisp face profile, and the remainder of the print will finish out the depth in your primary background color.

LAMP MONTNG OPTION

I have also designed a custom Lamp Clamp with a matching magnet insert to easily hang this logo on a standard post-type floor lamp (as seen in photos). You can find it here:

UPDATE: This now also available in a flat version to go with a full series of classic metal and rock band logos that I started. You can find it here: 

For the collection of band logos look here:  Slave To The Metal: 90s Band Plaques.

Tags