1 / 1
Modified Gaskets for 270° Hinges
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified gaskets to fit the 270° hinge (with 20mm screw spacing) where it meets the frame and fit the profile exactly.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is ONLY the two gaskets that match where the hinges attach to the frame. Please use Just_Liberty's Gasket remix for the remaining gaskets.
95A TPU with a 0.2mm first layer, 0.18mm second layer, 20mm²/s for first layer and all outer walls, 25mm²/s for first layer infill and all inner walls, 15mm²/s for top surface, 10% flow rectilinear ironing, and a 0.4mm ironing inset.
Be careful not to move the negative cubes. They are positioned so that the gaskets come out perfectly sized.