1 / 2
10" / inch mini server rack using 2020 aluminum extrusions
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More rigid than printed ones
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Fully printed racks are great and all but they take absolutely forever to print, a chore to expand, and are really flimsy.
BOM:
4 x N+1 x 50mm extrusions: for example for 3U you need (3+1) x 50 = 200mm
4 x 200mm extrusions: these go across to make the rack 1-" wide
4 x whatever extrusions: these give it depth, you can use 200mm if you want a square base
50 x M3x10 screws
50 x M3 slide nuts
12 X M5 hex nut per U (realistically just 8, nobody uses the middle one anyway)
M5 screws for rack mounts, I used 12 and 16mm ones