Ikea Bilresa, Tradfri & Styrbar Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to mount various Ikea Smart Switches to a UK light switch face plate without damaging paintwork or drilling.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A few different (but similar) designs to allow you to mount various Ikea Smart Switches to a UK light switch face plate.
There are versions for the following Ikea switches:
Bilresa Switch
Bilresa Wheel
Tradfri Switch
Styrbar
Assembly-
the Bilresa mounts - attach the steel plate included with the switch to the back of the mount, then they will snap to it.
the Tradfri mount - glue an M8 steel (plain - NOT stainless!!) into the recess on the back. the switch will then stick to it.
The Styrbar mount - this one uses 6x 3x2 cylinder magnets. (i intend to update this to use a metal washer like the Bilresa's though - watch this space!)
To fit-
Remove the two screws holding the lightswitch faceplate on, and slip the faceplate through the cutout. it should sit snugly in the recess. re-insert screws and tighten up.