Ikea Bilresa, Tradfri & Styrbar Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount various Ikea Smart Switches to a UK light switch face plate without damaging paintwork or drilling.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A few different (but similar) designs to allow you to mount various Ikea Smart Switches to a UK light switch face plate.
There are versions for the following Ikea switches:
Bilresa Switch
Bilresa Wheel
Tradfri Switch
Styrbar
Assembly-
the Bilresa mounts - attach the steel plate included with the switch to the back of the mount, then they will snap to it.
the Tradfri mount - glue an M8 steel (plain - NOT stainless!!) into the recess on the back. the switch will then stick to it.
The Styrbar mount - this one uses 6x 3x2 cylinder magnets. (i intend to update this to use a metal washer like the Bilresa's though - watch this space!)
To fit-
Remove the two screws holding the lightswitch faceplate on, and slip the faceplate through the cutout. it should sit snugly in the recess. re-insert screws and tighten up.