Porsche 928 Sunroof Front Outer Rail Slide Bushing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model replicates the factory bushing for the front Sunroof slide mount on the Porsche 928.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This replicates the outer slide bushing for the front sunroof slider/mount on the Porsche 928. This bush actuates the front wind deflector when the sunroof closes.
These bushings inevitably break when removing the front mount.
I recommend printing these out of nylon or similar hard-wearing, impact-resistant, low-stiction filament. I used Overture Easy Nylon and it worked great.
I lubricated using silicone spray lubricant and had good results.
Unlike the factory design, they are intended to push on one way only. I suggest printing with the bevelled face upwards.
