1 / 4
Porsche 928 Sunroof Front Outer Rail Slide Bushing — zdjęcie 1
1 / 4

Porsche 928 Sunroof Front Outer Rail Slide Bushing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model replicates the factory bushing for the front Sunroof slide mount on the Porsche 928.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This replicates the outer slide bushing for the front sunroof slider/mount on the Porsche 928.  This bush actuates the front wind deflector when the sunroof closes.

These bushings inevitably break when removing the front mount.

I recommend printing these out of nylon or similar hard-wearing, impact-resistant, low-stiction filament.  I used Overture Easy Nylon and it worked great.

I lubricated using silicone spray lubricant and had good results.

Unlike the factory design, they are intended to push on one way only.  I suggest printing with the bevelled face upwards.

Tagi