1 / 9
Next Level Racing ERS3 Haptic belt tensioner guide — image 1
1 / 9

Next Level Racing ERS3 Haptic belt tensioner guide

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Belt guide for ERS3 seat-mounted belt tensioner. Requires an 8 mm threaded rod for proper installation

Rating
5 / 5
Likes
1
Downloads
13
Makes
1
Views
107
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Mountable Belt tensioner system guide on the Next Level Racing ERS3 Haptic seat. Its purpose is to ensure proper routing and alignment of the belt under load. The guide is intended to work with a threaded rod mounting solution and requires an 8 mm diameter threaded rod for installation. It designed for 3" seatbelt (It may also be suitable for 2" wide belts) and helps maintain smooth belt movement while transmitting force effectively

what you need:

  • printable parts

  • 4 pcs M6 nuts

  • 4 pcs M6x45mm bolt

  • 4 pcs  bearings ( type 608 )

  • 1x M8 threaded rods (~295mm long)

  • 2x M8 self-locking nuts

Insert the four M6 nuts into their designated slots (lock_back) then place them into the seatbelt gap and tighten them with two screws (lock_front). The other two nuts will be needed for installing the seatbelt  roller rail (rail_base).

I also used a steel bracket for additional reinforcement — the kind typically used to mount kitchen cabinets (like the ones from IKEA), which I cut to size. This is because I plan to mount speakers on the end of the bracket and also place my VR headset holder there. However, this extra reinforcement is not necessary for the belt tensioner itself. The threaded rod alone provides sufficient rigidity.

Tags