Comencal Clash JR 26 SHOCK AXLE INSERT 2024 frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Temporary replacement for the 2024 Clash JR 26 Shock Axle Insert Clamp. Print in PLA-CF or PETG. Temporary use only.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Open Community License v1.1
This part is a temporary replacement for the Shock Axle Insert Clamp used on the 2024 Clash JR 26. It is intended as a temporary solution if the original part breaks or is lost. I recommend using it only as a temporary fix until you can obtain a genuine replacement part.
For best results, I recommend printing it with 85% infill using PLA-CF or PETG at a minimum. Stronger engineering-grade materials may provide improved durability.
Disclaimer: This part has only been tested on my own bike under my personal use. I cannot guarantee its performance, durability, or suitability for other riders, bikes, printing materials, or print settings. Use this part at your own risk. I accept no responsibility for any damage, injury, or failure that may result from using this part, including if it breaks while riding.
Please consider giving credit if you remix or share this design. While the license doesn't require attribution, it is greatly appreciated.