Hobby Caravan Door Spring Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this door spring lock for the old Hobby Prestige Caravan. Will work for any other caravan or mobile home.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 30
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This spring door lock will work with the Hobby Prestige original door spring lock spring, else you will need a 5.5 x 17.5 mm spring.
Everything else you can print using a 0.25 mm nozzle which is recommended since I designed the parts to fit well using that nozzle.
Use supports as in the .3mf file or as seen in the picture attached. The Pin you will just press into the wheel and the holder it should be a press fit and will sit nicely inside the housing of the spring lock.
Works as the original. I did create a wider door flange so that even though the cabinets gets saggy the doors will not open, like when pulling the trailer to the next stop.
Hope you like it and perhaps my efforts are worth a cup of coffee:
https://buymeacoffee.com/ne3d
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.