1 / 5
Elegoo Neptune 3/4/4pro Z axis belt tensioner — image 1
1 / 5

Elegoo Neptune 3/4/4pro Z axis belt tensioner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Elegoo Neptune 4 Pro Z-Axis Belt Tensioner requires an m6x25mm bolt or longer 6000z bearing

Rating
0 / 5
Likes
6
Downloads
18
Makes
0
Views
118
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Elegoo Neptune 4 Pro Z-Axis Belt Tensioner

Tired of subtle Z-banding or artifacts ruining your outer walls? This simple, drop-in upgrade ensures your Z-axis belts stay perfectly aligned, eliminating slack and noticeably improving overall part surface finish.

simply clips on under the top extrusion of you gantry and tensions the belts, i use 2 on my Neptune 4 pro. i added several holes to dial in the tension just right.

🛠 Hardware Needed

  • Bearing: 1x 6000Z bearing

  • Bolt: 1x M6 bolt (Any length 25mm or longer will work perfectly)

🚀 Print & Install Notes

  • Orientation: Print flat on its side for maximum structural strength.

  • Material: PETG, ASA, or ABS are recommended for long-term tension stability, though high-infill PLA+ works great as a quick fix.

  • Perimeters: Use at least 3–4 walls/perimeters with 30%+ infill so the tensioner doesn't flex under load.

If this model helps clean up your prints, don't forget to post a make and leave a rating!

Tags