Losmandy Cable Management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Losmandy Cable Management top or bottom mounted (Draft Model, print at your own discretion)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill. Print time around 70-80mins.
The fit is quite tight and the print scale might be able to be scaled up by 2% to make it a little looser.
This was created at the request of a Printables user and I made it based on my Angeleyes Losmandy plate for an EdgeHD 8". I have tested the top mounted option, I have not tested the other bottom option (that is just a mirror of the mounting clips, so I would expect to fit the same), print at your own discretion.
It contains a M5 hole to secure it to the plate, but I did not use it as it is really tight anyway. Screw might interfere with the cable legs, zip tie might work better.
If shorter cable legs are required, cut the model in the slicer as needed.
This is a draft model.