Dress Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A functional 3D replacement body to fix a broken dress clip using its original metal spring. Printed in PLA+ for durabil
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
3D Printed Dress Clip Replacement (PLA+ Long-Term Tested)
Don't throw away a broken dress clip or cardigan fastener if the internal metal spring is still working! This model is a functional replacement body designed to house your original spring mechanism, saving money and reducing waste.
This model is a proven, real-world fix that restores the clip's utility to look and work like new.
⚙ Print Settings & Specifications
Filament Used: PLA+ (Highly recommended over standard PLA for durability)
Infill: 100% (Crucial for strength around the tension-heavy hinge area)
Supports: [Specify Yes/No]
Layer Height: [Specify e.g., 0.12mm or 0.20mm]
💡 Why PLA+?
Standard PLA can be too brittle to handle the continuous mechanical stress of a tight metal spring. PLA+ offers superior impact resistance and excellent layer adhesion. This print has been actively used for over two months with zero failures, structural cracking, or loss of grip.
🔧 Assembly Instructions
Carefully remove the functional metal spring from your broken dress clip.
Clean up any support material from the printed hinge slots.
Align the original spring with the 3D-printed clip body.
Snap or slide the spring into place until secure.
Test the clamping tension on a piece of fabric before wearing