Samsung A57 5G case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
phone case for Samsung a57 5g
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 100
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for Samsung A57 5G
Print in TPU. I have tried TPU for AMS and 40D. Both works, but the one made with 40D is better to hold
Bambu TPU for AMS is printed on a P1S Combo
Fiberology 40D TPU is printed on Prusa MK3S
I have printed mine with honecomb infill for the back side with no bottom layers, it doesn't collect that much dust and his easy to hold.
I recommend you print this with TPU softer than TPU for AMS which is 68D/~105A. It does work, but the power and volume buttons are hard to press
Support
- Use supports for all the holes and the overhang over the side buttons. Check image how I placed the support.
Brim
- I used brim with no gap and cut the brim off with a sharp knife/scalpel and sanded the edge smooth.
UPDATES
27.07.2026 - Added a more refined version with and without 20x6x2.2mm magnets slots for attaching accessories
The volume and power buttons are easier to press on the v2