Benjamin Marauder Hill De-pinger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A "de-pinger" device that goes inside the Benjamin Marauder air chamber to break up any resonance and make it quieter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hill De-pinger design from Hill Airgun
original 3D https://www.thingiverse.com/Carbon_Composite/designs
O-ring: Crosman 1763-026; (AS568-118); ID 21,89mm CS 2.62mm
To install it properly, follow these steps: Completely depressurize the rifle. It is extremely dangerous to handle the air tube while it is pressurized. Unscrew the fill adapter housing on the front. Insert the depinger into the air tube and push it in until it is level with the pressure gauge port. Make sure the end with the smaller hole is facing forward (towards the muzzle). Once installed, screw the adapter back on and slowly pressurize.
Note: The Benjamin Marauder Field & Target (F&T) model with its factory-installed regulator, a depinger is neither necessary nor truly effective. The model's architecture itself resolves the acoustic issue.