1 / 1
Remix of Filament Welder - Print in Place — image 1

Remix of Filament Welder - Print in Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a easier to handle remix

Rating
3.5 / 5
Likes
2
Downloads
40
Makes
1
Views
159
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

I took the brilliant design and added hinges and a locking clip to make it easier to handle.

Print it in place with 50% infill.

After the print carefully (!) move the "wings" one or two times and then the hinges should work smoothly

Please be aware that you have to practice some time to "glue" the ends of filament together. It's a pain in the ... you know what i mean.

Especially when the spools to combine have only a little of filament on it, it is bend awfully.
You could try to make it a little weaker with a hair dryer, not a heat gun.

But after some testing it works. And the small tool helps a lot.

Glueing, pushing into the PTFE Tube, let it cool down and thats it.

Tags