32 ft Pinnace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
12 parts. 32 ft Pinnace with 12 pounder Carronade and slide.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial
You will need some glue!
1. Print the Hull
Print the hull as a single piece. The hull requires supports.
2. Fit the Seating Planks
Each seating plank is numbered. Ensure the hole in plank 4 aligns with the hole for the mast in the hull.
3. Assemble the Carronade
The Carronade is designed to slide back and forth. Apply glue to the top of the red slide assembly to fix the gun in place on the slide. Be careful not to get glue anywhere else or the gun will not slide.
4. Fit/Glue in the Carronade
The slots at the bottom of the assembly align with the seating planks.
5. Attach the bowsprit
6. Attach/Glue in the mast pin and mast
5. Glue in the yardarm
