1 / 2
Sawhorse Foot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Sawhorse Foot for sawhorses made of 2x4's
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 102
- Makes
- 1
- Views
- 560
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I built some simple sawhorses with 2x4's but realized I hadn't cut the feet at angles parallel to the ground. I 3D printed these simple feet which press onto the 2x4's and are held in place with a screw.
Print them in 100% infill in PETG for the strongest solution.
The angle is 14.5 degrees, which matches sawhorses made with this bracket from Home Depot:
https://www.homedepot.ca/product/hdx-5-5-inch-galvanized-steel-compartment-sawhorse-brackets/1001018660