Express Küchen Winkelhalter für Spülenunterschrankblende (Angle bracket for Express Küchen sink cover)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angle bracket to attach cover for the front of the sink element. Specialized part for Express Küchen kitchens.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I accidentally snapped the original angle bracket in my apartment's kitchen and was only able to find very expensive replacement parts online (e.g. https://kuechen-geisler.de/products/express-zubehoer-express-funktions-beschlaege-zubehoer-express-winkelhalter-fuer-spuelenunterschrankblend-html)
I still had a almost fully intact one (only missing one of the pegs) that I could use to reverse engineer this part. I have designed it in Onshape and made it available here in case customization is required: https://cad.onshape.com/documents/d8f580f0a7603e43c70c20c9/w/acf58dabc446856365e2de31/e/be8638ea3fb5889b3a12e970?renderMode=0&uiState=6a49021dc596de4872c511a6
The part is not an exact replica! The original part has little teeth on the side facing the wood panel that make it easier to align the bracket to the cabinet body. Adding these would have made printing a little harder, so I omitted them for ease of printing. This should not matter if the screw holes already exist, as the part should just slide into the existing screws. This part is also a little thicker and has more support for the angled part, which didn't cause any problems in my kitchen.
I hope I was able to save someone else 30 bucks, too! :D
My print settings:
PLA
Layer height: 0.2mm
Supports: Yes, Tree (Needed for pegs/dowels)
Wall loops: 5
Sparse infill density: 25