1 / 3
Garmin Varia 27.2mm Seatpost Mount (15° Angle) — image 1
1 / 3

Garmin Varia 27.2mm Seatpost Mount (15° Angle)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Garmin Varia mount for 27.2mm seatposts. Installs without removing seatpost. Uses factory insert + M3 bolts.

Rating
4 / 5
Likes
8
Downloads
67
Makes
0
Views
371
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mount designed to securely attach your Garmin Varia radar/light to a standard 27.2mm seatpost. It features a 15° angle to compensate for the seatpost lean, ensuring your radar points straight back.

No need to remove your seatpost for installation thanks to the elasticity of the clamp part (tested in PLA).

Hardware Required :

  • 1x Factory Garmin Varia plastic insert and its 2 screws (see update).

  • 1x M3x25mm screw

  • 1x M3 heat-set insert or hex nut.

Note : If you need a modification for a different seatpost setup or any improvement idea, just leave a comment and I'll gladly upload it!

Update : 

I have uploaded new versions (tight and loose tolerances) of the varia side which allows you to screw the garmin insert into the part insted of the other way around. This update should make you able to use any insert you want as long it is at least 6.5mm thick, its diameter does not exceed 33.6mm. 

This new design requires the use of two more M3 heat-set inserts.

Tags