Garmin Varia 27.2mm Seatpost Mount (15° Angle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garmin Varia mount for 27.2mm seatposts. Installs without removing seatpost. Uses factory insert + M3 bolts.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount designed to securely attach your Garmin Varia radar/light to a standard 27.2mm seatpost. It features a 15° angle to compensate for the seatpost lean, ensuring your radar points straight back.
No need to remove your seatpost for installation thanks to the elasticity of the clamp part (tested in PLA).
Hardware Required :
1x Factory Garmin Varia plastic insert and its 2 screws (see update).
1x M3x25mm screw
1x M3 heat-set insert or hex nut.
Note : If you need a modification for a different seatpost setup or any improvement idea, just leave a comment and I'll gladly upload it!
Update :
I have uploaded new versions (tight and loose tolerances) of the varia side which allows you to screw the garmin insert into the part insted of the other way around. This update should make you able to use any insert you want as long it is at least 6.5mm thick, its diameter does not exceed 33.6mm.
This new design requires the use of two more M3 heat-set inserts.
